100+ Shed With Double Doors

www.shednation.com

Introduction: Building Your Own Double Door Shed

Are you tired of squeezing your lawnmower and garden tools through a narrow shed door? Building a shed with double doors is a fantastic solution! It allows for easy access for larger items, making storage and retrieval a breeze. This step-by-step guide will walk you through the process, from planning to completion, empowering you to create a functional and attractive storage space.

Step 1: Planning and Design

Before you even pick up a hammer, careful planning is crucial. Consider the following:

Shed Size: How much storage space do you realistically need? Measure your existing tools and equipment to get an accurate estimate. Consider future needs as well.

Door Size: What's the widest item you'll need to store? The double doors should be wide enough to accommodate it comfortably. Standard double door widths range from 4ft to 6ft, but customize based on your needs.

Foundation: Will you build on a concrete slab, gravel base, or wooden skid foundation? Each has its advantages and disadvantages in terms of cost, drainage, and permanence.

Materials: Choose durable and weather-resistant materials like pressure-treated lumber for the frame, and plywood or siding for the walls. Consider roofing materials like asphalt shingles, metal roofing, or composite tiles.

Permits: Check your local building codes and regulations. You may need a permit before starting construction.

Step 2: Gathering Materials and Tools

Create a comprehensive materials list based on your design. This will help you stay organized and avoid unnecessary trips to the hardware store. Common materials include:

Pressure-treated lumber (for the foundation and framing)

Plywood or siding (for the walls)

Roofing materials (shingles, metal, etc.)

Fasteners (nails, screws, bolts)

Door hardware (hinges, latches, handles)

Concrete mix (if building a slab foundation)

Gravel (if building a gravel base foundation)

Essential tools you'll need:

Measuring tape

Level

Square

Circular saw

Drill/driver

Hammer

Safety glasses

Gloves

Shovel (for foundation work)

Step 3: Building the Foundation

The foundation is the base of your shed, so accuracy and stability are paramount. Here's a general overview for each foundation type:

Concrete Slab: Pour a level concrete slab, ensuring it's slightly larger than the shed's footprint. Use forms to contain the concrete and a screed board to level the surface.

Gravel Base: Excavate the area, line it with landscape fabric, and fill it with compacted gravel. This provides good drainage.

Wooden Skid Foundation: Build a rectangular frame using pressure-treated lumber. Ensure it's level and secure.

Whichever foundation you choose, make sure it's level, square, and adequately supports the shed's weight.

Step 4: Framing the Walls

Construct the wall frames using pressure-treated lumber. Follow these steps:

Cut Lumber: Cut the top plate, bottom plate, and studs to the required lengths.

Assemble Frames: Lay out the top and bottom plates, and position the studs between them at regular intervals (typically 16 or 24 inches on center).

Nail/Screw Together: Securely nail or screw the studs to the top and bottom plates.

Door Framing: Frame the opening for the double doors, ensuring it's the correct width and height. Use headers above the door opening for added support.

Raise Walls: Carefully raise the wall frames and attach them to the foundation, ensuring they are plumb (perfectly vertical) and square.

Step 5: Installing the Walls

Attach the siding or plywood to the framed walls.

Cut Siding: Cut the siding to the correct size, allowing for overlaps and trim.

Attach Siding: Nail or screw the siding to the wall frames, starting from the bottom and working your way up. Make sure each piece is level and properly aligned. Overlap the seams appropriately for weather protection.

Cut Door Opening: Cut out the door opening from the siding if necessary.

Step 6: Building the Roof

The roof protects your shed from the elements. There are several roof styles, but a simple gable roof is easiest to build.

Rafters: Cut the rafters to the appropriate length and angle.

Ridge Board: Attach the rafters to a ridge board at the peak of the roof.

Roof Sheathing: Cover the rafters with plywood or OSB sheathing.

Underlayment: Install roofing underlayment (felt paper) to provide a waterproof barrier.

Roofing Material: Install your chosen roofing material (shingles, metal, etc.) according to the manufacturer's instructions. Start at the bottom and work your way up, overlapping each row.

Step 7: Installing the Double Doors

This is where your large opening comes to life.

Pre-Hang Doors: Consider buying pre-hung double doors to simplify the installation process.

Install Hinges: Attach the hinges to the doors and the door frame.

Hang Doors: Carefully lift the doors into the frame and secure the hinges.

Adjust: Adjust the doors to ensure they open and close smoothly and that they are properly aligned.

Install Hardware: Install the latches, handles, and any other desired door hardware.

Step 8: Finishing Touches

Complete the shed with these final steps:

Trim: Add trim around the doors, windows (if any), and corners to give the shed a finished look.

Paint/Stain: Paint or stain the shed to protect it from the elements and to match your desired aesthetic.

Caulk: Caulk any gaps or cracks to prevent water infiltration.

Clean Up: Remove any debris and clean up the construction area.

Conclusion

Congratulations! You've successfully built a shed with double doors. This project requires time, effort, and attention to detail, but the result is a valuable and customized storage solution that will serve you for years to come. Enjoy your new shed and the convenience of its spacious double door entry!

Cedarshed Studio 12x6 Shed [st126]

www.shednation.com

Dcor Design Pracchia 7 X 10 Wooden Storage Shed

www.wayfair.co.uk

Little Cottage 12 X 10 Ft. Classic Wood Cottage Panelized Storage Shed

www.walmart.com