78+ Plastic Chicken Mesh

olympicpeninsula.surfrider.org

Opening: Building a Simple Chicken Wire Pen This guide provides a straightforward, step-by-step process for constructing a small, portable chicken pen using readily available materials. This type of pen is ideal for temporary containment, allowing your chickens access to fresh grazing areas while keeping them safe from predators. This pen uses plastic chicken mesh which is more lightweight and easier to handle than metal mesh.

Materials and Tools Before you begin, gather the following:

78+ Plastic Chicken Mesh (the amount needed will vary based on desired pen size)

Wooden stakes (4 for corners, more for added support along the sides, depending on the length of each side)

Zip ties or galvanized wire

Hammer or mallet

Wire cutters (if using galvanized wire)

Measuring tape (optional, but helpful for ensuring uniform sides)

Gloves (recommended for handling the mesh and stakes)

Step 1: Planning and Measuring Determine the desired size and shape of your chicken pen. A simple square or rectangle is easiest to construct. Measure the perimeter of the pen and calculate the amount of chicken wire needed. Remember to add extra length for overlapping and securing the mesh.

Step 2: Installing the Corner Stakes Use the hammer or mallet to drive the four corner stakes into the ground. Ensure the stakes are firmly planted and relatively level. The depth to which you drive the stakes will depend on the soil type and the desired height of the pen. For added stability, consider using longer stakes.

Step 3: Attaching the Chicken Wire Starting at one corner stake, unroll the chicken wire and begin attaching it to the stake using zip ties or galvanized wire. Secure the wire to the stake at regular intervals (e.g., every 6-8 inches) for a secure hold.

Step 4: Continuing Around the Perimeter Continue unrolling the chicken wire and attaching it to the remaining corner stakes, pulling the wire taut as you go. This will help prevent sagging and ensure a more secure enclosure.

Step 5: Adding Support Stakes (Optional but Recommended) For pens with long sides, add additional support stakes between the corner stakes. These will help prevent the chicken wire from sagging and provide additional stability. Secure the chicken wire to these stakes as well.

Step 6: Overlapping and Securing the Ends Once you reach the starting corner, overlap the end of the chicken wire with the beginning, creating a secure closure. Use zip ties or galvanized wire to tightly fasten the overlapping sections together.

Step 7: Reinforcing the Bottom Edge To prevent chickens from escaping by digging under the fence, consider reinforcing the bottom edge. This can be done by burying the bottom edge of the chicken wire a few inches into the ground or by attaching additional wooden boards or rocks along the base.

Step 8: Adding a Gate (Optional) If desired, create a simple gate by cutting an opening in the chicken wire and constructing a small frame from scrap wood. Attach the frame to the chicken wire with hinges and add a latch to secure the gate closed.

Conclusion: A Safe and Portable Chicken Pen You now have a simple, portable chicken pen using plastic chicken mesh! Remember to regularly inspect the pen for damage and make any necessary repairs. Always supervise your chickens when they are in the pen, especially if predators are a concern. This pen provides a great way to give your chickens access to fresh grass and insects while keeping them safe and contained.

Plastics Are Made Out Of At Albert Vito Blog

hxeerdxfy.blob.core.windows.net

Action Of The Week: Just Say No To Single-use Plastics

www.floridamuseum.ufl.edu

Eliminate The Most Toxic And Harmful Forms Of Plastic!

olympicpeninsula.surfrider.org